View TFS403_1324602.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS403.doc
version 1.4
25.11.2002
VI TELEFILTER
Measurement condition
Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances at fc *:input: 81 output: 86
Filter Specification
TFS 403
1/5
II -11,5 pF II -12,6 pF
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 403 is the minimum of the pass band attenuation amin . The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 403,5 MHz without tolerance. The given values for the relative attenuation a rel and for the group delay ripple have to be reached at the frequencies given below even if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss (Reference level) Nominal frequency Pass band Amplitude ripple in PB Relative attenuation fN ....... fN 5,5 fN 9 fN 19,5 fN + 400,5 2 fN 3 MHz MHz MHz MHz MHz ...... ....... ....... ....... ae
typ. Value
4,6 dB max.
Limit
5,5 dB
fN PB p-p
a rel
-
403,5 MHz
fN 0,6 dB max.
1,5 MHz 1 dB
fN fN fN fN fN
1,5
MHz MHz MHz MHz MHz
32 32 45 70 85 dB dB dB dB dB
max. 1 min. min. min. min. min. 20 25 35 20 20 -
dB dB dB dB dB dB
9 19,5 23,5 + 406,5
Return loss within PB
14 dB
Input power level Temperature coefficient of frequency Tc f ** Operating temperature range Storage temperature range
-20 ppm/K -
max.
10
dBm
- 10 C.. + 60 - 40 C.. + 85
C C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) fc(Hz) = Tcf(ppm/K) x (T - TA) x fCTA (MHz)
generated: checked / approved:
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS403.doc
version 1.4
25.11.2002
VI TELEFILTER
Filter Specification
TFS 403
2/5
Construction and Pin Connection
(All dimensions in mm)
5.0 SQ -0.1 7 5
+0.15
S 403 P48
1 3
Date code
Pin Pin Pin Pin 1 2 3 4,8 Input Input RF Return Ground Package Ground Pin 5 Output Pin 6 Output RF Return Pin 7 Ground date code: M N P ... year + week 2000 2001 2002
50
matching circuit:
L1 Input 50 Ohm L2
1
5
L3 Output 50 Ohm L4
SAW
2,3,4,6,7,8
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS403.doc
version 1.4
25.11.2002
VI TELEFILTER
Stability Characteristics
Filter Specification
TFS 403
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 - 14 Test N
2. Vibration:
3. Change of temperature:
4. Resistance to solder heat (reflow):reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4;
Packing Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer mm
Tape (all dimensions in mm) W : 12 0,3 Po : 4 0,1 Do : 1,5 + 0,1 E : 1,75 0,1 F : 5,5 0,05 G (min) : 0,75 P2 : 2 0,05 P1 : 8 0,1 D1(min) : 1,5 Ao : 5,3 0,1 Bo : 5,3 0,1 CT : 9,5 0,1
Po EMBOSSED CARRIER TAPE
3000 min 300 mm min 500 mm min 300
Do
P2
E Ao D1 CT Bo F W
G
P1
COVER TAPE
W2
Reel (all d imensions in mm): A W1 N (min) C : : : : 330 12,4 + 0,2 18,4 50
A C N
W2 (max) :
13
+0,5 -0,2
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS403.doc
version 1.4
25.11.2002
VI TELEFILTER
Air reflow temperature conditions
Filter Specification
TFS 403
4/5
1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS403.doc
version 1.4
25.11.2002
VI TELEFILTER
History
Version 1.0 Reason of Changes
Filter Specification
TFS 403
5/5
Name Chilla
Date 28.05.2002
generation of "Development specification" according to customer requirements and feasibility study change of Tcf add limit line 20 dB at 804-810 MHz limit line at 2 fN 3 MHz corrected add typical values off terminating impedance and relative attenuation change terminating impedance and typical values of insertion loss and relative attenuation
1.1
Chilla
22.08.2002
1.2 1.3 1.4
Chilla Pfeiffer Pfeiffer
26.08.2002 11.09.2002 25.11.2002
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS403

	To Download TFS403 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .